
Installed by General Makina in the Zanzibar region of Tanzania, the Titan 100 Mobile Concrete Batching Plant features a pre-feeding system and has a concrete production capacity of 100 m³ per hour. It is a mobile ready-mix solution offering fast setup.

Installed and commissioned in Turkey, this 110-type fixed crushing plant delivers an average capacity of 300 tonnes/hour. A heavy-duty vibrating rock feeder bunker, primary jaw crusher, vibrating screens and conveyor belt systems separate run-of-mine rock and hard ore to the required sizes.

The PDK stationary crushing plant we put into production in Saudi Arabia works at 200-250 tonnes per hour. A GNR PDK 02 primary impact crusher greatly reduces coarse limestone, and a 4-deck vibrating screen splits the material into 4 sizes in a single pass. The plant was prepared for the desert climate and high temperatures.

Commissioned by General Makina in Serbia, this stationary crushing plant has a capacity of 500 tons per hour of crushing and screening. It is a fixed-line crushing and screening solution designed for high-tonnage aggregate production.

The GNR PDK01 stationary mining crushing plant we commissioned in the Belgrade region of Serbia works at 400 tonnes per hour. The GNR PDK01 primary impact crusher reduces the material at a high ratio, while the GNR 130 tertiary crusher raises end-product quality to deliver precisely sized cubical aggregate.

Commissioned in Antalya, this bauxite crushing and screening plant processes hard, abrasive bauxite ore at 200-250 tonnes/hour. It is built around a 110-type vibrating rock bunker, a 110-type jaw crusher and a twin 110-type jaw crusher, supported by a vibro grizzly screen and a bypass screen.

The General 01 mobile crushing plant working in Algeria crushes and screens 120-180 tonnes of material per hour. A bypass grizzly feeder and a mobile impact crusher allow primary and secondary crushing in a single machine; hydraulic legs get the plant ready to produce in 15 minutes.

Diamond 60 is a mobile plant operating in Bulgaria with an output of 60 m³ of fresh concrete per hour. Built on a chassis, it can be repositioned whenever the job site changes and supplies ready-mix concrete on the spot.

The plant in Jijiga (Ethiopia) crushes and screens basalt of very high hardness and abrasiveness at 120-150 tonnes per hour. The crushing line has three stages: a jaw crusher as primary, a cone crusher as secondary and a vertical shaft impact crusher as tertiary.

The General 02 mobile crushing plant working in Türkiye reaches 250 tonnes per hour thanks to its GNR PDK02 impact crusher. Oversize material returns to the crusher in a closed circuit, yielding 0-25 mm and 0-50 mm aggregate.

The GNR 01 closed-circuit mobile crusher working at a quarry in Türkiye has a capacity of 120-180 tonnes per hour. The 2-chamber box of its GPS 1210 impact rotor crusher reduces run-of-mine rock first to 0-50 and then to 0-25 mm; a 1600x5000 mm 4-deck screen separates 0-5, 5-12, 12-19 and 19-40 mm cubical aggregate.

The GNR 02 mobile crushing plant we commissioned in Serbia works with a crushing and screening capacity of 250-300 tonnes per hour. Carrying all its equipment on a single platform, it is a mobile solution that can move quickly between sites.

Installed in Denizli, the General 03 dual-chassis mobile crushing plant has a capacity of 250-375 tonnes/hour of crushing and screening. Its dual mobile chassis combines high-tonnage production with mobile setup flexibility.

In this project in Türkiye, a mobile tertiary crusher was added to the General 01 mobile crushing plant. Together the two units crush and screen 120-180 tonnes per hour; both sit on mobile chassis, so the line is easy to move and quick to set up.

Shipped to Libya, the GNR series mobile crushing plants offer different capacity options: GNR 01 at 120-180 tons per hour, GNR 950 at 150-240 tons per hour and GNR 02 at 250-300 tons per hour, providing mobile crushing and screening solutions for varying site and tonnage needs.

Installed in Turkey, the GNR 640 mobile crushing plant has a crushing and screening capacity of 60-100 tons per hour. It is a compact, easily transportable mobile crushing and screening solution for mid-scale quarry and infrastructure sites.

The GNR 640 mobile crusher working in Türkiye crushes and screens 100 tonnes per hour in this project. In the closed-circuit line, which accepts feed up to 500 mm, a GPJ 60 jaw crusher and a GNR 50 secondary rotor crusher break the hard rock; a 1200x4000 mm 3-deck screen separates 0-5, 5-12 and 12-19 mm aggregate.

Shipped to Africa, the GNR 944 mobile crushing and screening plant has a capacity of 120-150 tons per hour. Designed for hard-stone applications, the plant offers ease of long-distance transport and site setup thanks to its mobile structure.

Delivered to Niger, the General 950 mobile crusher works at 160-240 tonnes per hour in this project. In the closed-circuit line with an 800 mm feed size, a GPJ-90 jaw crusher (primary) and a DMK01 rotor crusher (secondary) break hard ore; the plant starts producing 30 minutes after reaching the site.

Commissioned in Diyarbakir, the General 950 mobile crusher breaks abrasive hard rock such as granite and basalt at 160-240 tonnes per hour. The line accepts feed up to 800 mm, with a GPJ-90 jaw crusher as primary and a DMK01 rotor crusher as secondary; on site it starts producing within 30 minutes.

Commissioned in Turkey, the GNRM-YE 1650-4K mobile washing and screening plant has a capacity of 300-350 tons per hour. It is a mobile solution designed to wash aggregate free of fines and clay and to classify it into four different fractions.

Now running in Bulgaria, the Magnum 120 stationary concrete plant produces 120 m³ of fresh concrete per hour. With a twinshaft mixer, a 4x30 m³ aggregate bin and fully automatic computer control, it meets the ready-mix demand of large infrastructure and building projects.

Commissioned in Russia, the mobile jaw and cone crushing and screening plant works at 150 tonnes per hour. In the closed-circuit system built on two separate mobile chassis, a primary mobile jaw crusher and a mobile cone crusher that raises the share of cubical product process hard, abrasive rock.

The stationary crushing and screening plant we built in 2018 in Sarajevo, capital of Bosnia and Herzegovina, consists of two crushers: a GPS120 primary impact crusher and a GTK650 tertiary crusher. The line combines primary impact crushing with tertiary cubical shaping.
