Skip to content

Serbia/Belgrade Project: 400 t/h Stationary Mining Plant with PDK and Tertiary Crushers

August 5, 2026
400 t/h Stationary Mining Crushing Plant with GNR PDK01 in Belgrade: High Tonnage, Cubical Aggregate

Challenge

A fixed crushing plant averaging 400 t/h was needed in the Belgrade region of Serbia for major infrastructure projects and quarries.

Solution

GNR PDK01 primary impact crusher, GNR 130 tertiary crusher for fine crushing, heavy-duty vibrating screens and belt lines.

Result

After installation and field tests the plant was commissioned in Belgrade and produces cubical aggregate.

The Balkans are one of the markets where our high-tonnage plants are most in demand. The 400 t/h stationary mining crushing plant we started up in the Belgrade region of Serbia, after completing installation and site tests, was designed to meet the aggregate needs of major infrastructure works and quarries in the area.

400 Tonnes per Hour and a Powerful Crusher Pair

Developed for heavy operating conditions, the plant reaches an average crushing and screening capacity of 400 tonnes per hour. The first stage is handled by the GNR PDK01 primary impact crusher, which offers a high reduction ratio; the stage where fine crushing takes place and end-product quality is raised is handled by the GNR 130 tertiary crusher.

Precisely Sized Aggregate, Non-Stop Production

The strong crushing capacity is complemented by heavy-duty vibrating screens and belt conveyors. Producing precisely sized cubical aggregate that meets road, concrete and construction standards, the Belgrade plant runs continuously on the Serbian site with low operating costs.

If you are planning a similar high-tonnage stationary plant, share your material and target fractions with us and we will work out a configuration tailored to your project.

Belgrade GNR PDK01 Project – FAQ

What is the plant's capacity?

It works with an average crushing and screening capacity of 400 tonnes per hour.

Which crushers are used?

A GNR PDK01 primary impact crusher in the first stage and a GNR 130 tertiary crusher in the final stage.

What does the plant produce?

Precisely sized cubical aggregate that meets road, concrete and construction standards.

Which projects does the plant serve?

It supplies aggregate to major infrastructure works and quarries in the region.

Could you build a similar plant for us?

Yes. Send us your material and fraction targets and we will prepare a tailored quotation.

Related Content

Quarry Stone Crushing and Screening Plant, Fixed Installation
Products

Quarry Stone Crushing and Screening Plant, Fixed Installation

Stationary crushing plants are high-capacity, low-maintenance stone crushing and screening plants that operate for years at the sam…

GNR PDK Horizontal-Shaft Impactor for Limestone and Concrete Waste
Products

GNR PDK Horizontal-Shaft Impactor for Limestone and Concrete Waste

The GNR PDK series primary impact crusher (HSI) breaks coarse limestone and concrete waste by impact. Capacity 250–900 tph, rotor 1…

GNR Series Tertiary Impact Crusher for Sand Making
Products

GNR Series Tertiary Impact Crusher for Sand Making

The GNR series tertiary crusher is a third-stage impactor that turns secondary product into fine, cubical aggregate and 0–5 mm manu…

Manisa Project: 300 t/h GNR PDK01 + GNR 100 Stationary Crushing and Screening Line
Projects

Manisa Project: 300 t/h GNR PDK01 + GNR 100 Stationary Crushing and Screening Line

The GNR PDK01 stationary crushing and screening plant we commissioned in Manisa works at 300 tonnes per hour. The GNR PDK01 primary…

Stationary Crushing Plant - Serbia (500 Tons/Hour)
Projects

Stationary Crushing Plant - Serbia (500 Tons/Hour)

Commissioned by General Makina in Serbia, this stationary crushing plant has a capacity of 500 tons per hour of crushing and screen…