crushing and screening plant technical specifications

This page brings together our products, project examples and guides related to “crushing and screening plant technical specifications”. A mobile crushing plant is a full crushing-screening unit on a wheeled (trailer) chassis that can be towed from site to site. Versus stationary, it offers fast setup and mobility; versus tracked, cheaper road transport.

crushing and screening plantcrushing and screening plant manufacturercrushing and screening plant pricecrushing and screening plant salecrushing and screening plant solutionscrushing and screening plant equipmentcrushing and screening plant machinecrushing and screening plant system

Related Products

Product

General 01 Mobile Crushing & Screening Plant (GPS 1210)

The General 01 mounts a GPS 1210 triple-pendulum impactor on a single wheeled chassis and performs primary and secondary crushing in that one machine. It runs 120-180…

Product

General 02 Wheeled Impact Plant with 1000 mm Inlet

The General 02 is a wheeled crushing-and-screening plant driven by a GPS 1413 primary impactor. It puts out 250-300 tph, opens the widest inlet in the family at 1000 mm…

Product

General 03 Flagship Plant with GPS 1415 Impactor, 250-375 tph

The General 03 heads the wheeled General family, powered by a GPS 1415 primary impactor. At 250-375 tph, with a 2400×5000 mm four-deck screen, a 750 kVA power unit and a…

Product

General 800 Closed-Circuit Plant with PDK 1280 Impactor

The General 800 packs a single-chassis, closed-circuit wheeled plant around a PDK 1280 primary impactor. Feeding 600 mm rock at 80-150 tph, it gives a high reduction…

Product

General 640 Compact Wheeled Plant: GPJ 60 Jaw + GNR 50 Impactor

The General 640 is a tow-behind, closed-circuit wheeled crushing and screening plant that pairs a GPJ 60 jaw with a GNR 50 impactor at 60-100 tph. It takes 500 mm feed…

Product

General 950: GPJ 90 Jaw Ahead of a DMK01 Impact Crusher

The General 950 is a wheeled plant that sets a GPJ 90 primary jaw ahead of a DMK01 secondary impact crusher. 120-180 tph, 800 mm feed, 1600×5000 mm triple-deck…

Product

General 944 with GM430 Cone Secondary for Abrasive Rock

The General 944 pairs a GPJ 90 primary jaw with a GM430 secondary cone on a wheeled crushing-and-screening chassis. At 120-180 tph it breaks hard, abrasive stone —…

Product

GNR-MC110: GPJ 110 Jaw and DMK03 Impactor on Two Chassis

The GNR-MC110 is a twin-chassis wheeled plant pairing a GPJ 110 primary jaw with a DMK03 secondary impact crusher. 200-300 tph, 900 mm feed, 2000×6000 mm four-deck…

Product

Mobil 90 Plant That Crushes, Washes and Screens Clayey Gravel

Its GPJ 90 jaw accepts feed up to 800 mm and the plant crushes, washes and screens riverbed and clayey material in one pass at 90-150 tph. The 0-5 mm sand fraction is recovered without loss to water.

Blog

Crushing plant RFQ technical specification

Most quotations for a crushing and screening plant come back impossible to compare, and the cause is rarely the suppliers. It is the document the buyer sent out.

Blog

Jijiga, Ethiopia: 120-150 t/h Basalt Crushing and Screening Plant Handed Over

The installation of the Basalt Crushing and Screening Plant with a capacity of 120-150 tons per hour was successfully completed.

Blog

Primary, Secondary and Tertiary Crushing Stages

In a crushing and screening plant the material is reduced step by step: primary accepts up to 1300 mm, secondary 800 mm, tertiary 150 mm and VSI only 25-55 mm.

Blog

Jobsite material flow and stockpile layout

Once a mobile crushing and screening plant is on the ground, output is usually governed less by the machine rating than by how material travels around the site.

Product

GNRK Series Jaw Crusher for Primary Crushing

Suited to hard, abrasive rock such as granite, basalt, river gravel and slag; the entry crusher of every crushing-screening plant.