screening plant technical specifications — Page 2

The GNR ME1650 is a mobile DRY screening plant rated at 120-180 tph, carrying no washing unit. … Its GPJ 90 jaw accepts feed up to 800 mm and the plant crushes, washes and screens riverbed and clayey material in one pass at 90-150 tph. The 0-5 mm sand fraction is recovered without loss to water. … Most quotations for a crushing and screening plant come back impossible to compare, and the cause is rarely the suppliers. It is the document the buyer sent out. … The GNR YM1240 is a COMPACT mobile sand washing-and-screening plant rated at 60-100 tph. A sand hopper, washing screen and screw scrub river and mountain sand with water, stripping clay and silt. … The GNR YM1650 is the range's BEST-SELLING washing-and-screening plant at 120-180 tph. Its wide washing screen and screw turn out clean sand in several sizes. … The fine material screen is a linear vibrating screen with two counter-rotating vibromotors for separation down to 600 microns; 5-10 tph, 5 decks. IME-GM155 model. … GNR ME2060 mobile screening plant: 200-350 tph capacity, 2000×6000 mm triple-deck screen, 20 m³ hopper with grizzly pre-scalping. Dry screening, full automation. … The installation of the Basalt Crushing and Screening Plant with a capacity of 120-150 tons per hour was successfully completed.

aggregate plant technical specificationscrushing plant technical specifications

Product

Vibrating Sand Feeder — Bin/Hopper Feeder

It accepts up to 200 mm feed and ensures uninterrupted flow at wash-and-screen outlets and concrete-plant aggregate lines.

Product

Stationary Mechanical / Soil-Stabilization Plant (Plant-Mix)

General Makina's stationary mechanical plant is a permanently installed, high-tonnage soil-stabilization plant.

Product

Fine Material Screw Washer (Sand Screw Washer)

Turnkey washing line General Makina combines the screw washer with the hydrocyclone-dewatering group, GNR YM washing-screening plants and a concrete batching plant in one project; crushing, screening and

Blog

Primary, Secondary and Tertiary Crushing Stages

In a crushing and screening plant the material is reduced step by step: primary accepts up to 1300 mm, secondary 800 mm, tertiary 150 mm and VSI only 25-55 mm.

Product

GNRK Series Jaw Crusher (Primary)

Suited to hard, abrasive rock such as granite, basalt, river gravel and slag; the entry crusher of every crushing-screening plant.

Product

Belt Conveyor — Conveyor Belt and Material Handling Systems

A modular bolted frame that continuously moves material between stages in a crushing-screening-washing plant.