cement silo capacity tph — Page 2

The General Makina cement silo is a vertical/horizontal steel store that keeps cement for a concrete batching plant and feeds the weigh hopper. 30-100 ton standard, 50-2500 ton custom; bolted (export) … With 200-600 tph capacity, 3-5 cold silos, a twin-shaft mixer (2×22 kW) and mass (bulk) cement dosing, it performs mechanical stabilization. … With 200-750 tph capacity, 3-5 cold aggregate silos, mass cement dosing and a 2×37 kW twin-shaft mixer, it produces stabilized granular road base (plant-mix) — not ready-mix concrete — for the base and … The assembly works of the fixed stone crushing and screening plant with a capacity of 450 - 500 TPH, one of our most successful projects we have realized in 2021, have been completed. … General Makina vibrating rock feeder: 75-600 tph capacity, feed size up to 1500 mm, with a grizzly by-pass that pre-scalps fines and soil before the crusher. … General Makina belt conveyors: 7 widths from 500 to 1200 mm, built to any required length, 50-1000 tph capacity. Geared-motor or belt-and-pulley drive; flat, chevron and cleated belt options. … Concrete Batching Plant is the seires of equipment which located in plant with concrete mixers, mixer feed belt, cement silos and aggregate bunker.

Product

GNR K Series Cubicizer Crusher

Capacity 45–250 tph, rotor 1000×750–1550×1800 mm, feed 120–210 mm, 45–160 kW. It improves grain shape for concrete/asphalt and raises manufactured-sand quality.

Product

GNR PDK Series Primary Impact Crusher

Capacity 250–900 tph, rotor 1400×1500–1600×2000 mm, feed 900–1300 mm, 200–500 kW. On limestone it delivers up to 20:1 reduction and highly cubical product in one stage.

Product

GNR Series Vertical Shaft Impactor (VSI)

Capacity 45–210 tph, rotor 700–900 mm, feed ≤55 mm, 90–400 kW. Its purpose is exceptional cubicity and manufactured sand rather than reduction.

Product

GNRK Series Jaw Crusher (Primary)

Capacity 20–600 tph, feed openings 610×380–1400×1100 mm, 30–200 kW. Suited to hard, abrasive rock such as granite, basalt, river gravel and slag; the entry crusher of every crushing-screening plant.

Product

GNR DMK Series Secondary Impact Crusher

Capacity 120–500 tph, rotor 1100×1000–1400×2000 mm, feed 800 mm, 160–500 kW. On limestone and low-to-medium abrasive lines it gives ~10:1 reduction and high shape quality.

Product

GNR Series Tertiary Crusher

Capacity 70–300 tph, rotor 1200×650–1200×1500 mm, feed 150 mm, 132–250 kW. High shape quality on limestone and low-to-medium abrasive lines.

Product

GPS Series Primary-Secondary Impact Crusher

Capacity 100–400 tph, rotor 1200×1000–1400×1500 mm, feed 600–1000 mm, 160–315 kW. On limestone it delivers coarse crushing plus cubical secondary product from a single machine, cutting CAPEX.

Blog

110 Crushing Plant how many tons broke a hour?

The capacity of 110 Stone crushing plant on hard stone: In limestone 250-300 tons/hour work capacity. In basalt stone 200-230 tons/hour work capacity.

Blog

90 Crushing screening plant how many tons stone is break per hour?

In basalt stone 100-120 tons/hour work capacity.

Blog

350 t/h Stone Crushing Plant manufacturing was done for Hakkari

Our stone crushing plant with 350 t/h capacity go into action in Hakkari. Our facility is hihg-capacity and long service life which we delivered Seyyitoglu Construction.

Product

Vibrating Sand Feeder — Bin/Hopper Feeder

Standard bin capacities are 25, 50, 75 and 100 m³. Feed capacity ranges from 75 to 600 tph depending on material and plant.

Project

Bauxite Crushing & Screening Plant - Antalya / Turkey

Frequently Asked QuestionsWhat is the plant capacity?It has an average capacity of 200-250 tonnes/hour of crushing and screening.