screening plant capacity tph — Page 2

The twin vibrating screen runs two screen bodies together to double the surface area; 100-500 tph capacity, circular motion, screening without choking in high-tonnage stationary crushing plants. … The conventional vibrating screen separates crushed aggregate into required sizes; a 1-4 deck circular-motion screen, 100-400 tph, GNR 1020 to GNR 2470 model range, bolted-weldless body and easily replaceable … The assembly works of the fixed stone crushing and screening plant with a capacity of 450 - 500 TPH, one of our most successful projects we have realized in 2021, have been completed. … The GNR ME1650 is a mobile DRY screening plant rated at 120-180 tph, carrying no washing unit. … Its GPJ 90 jaw accepts feed up to 800 mm and the plant crushes, washes and screens riverbed and clayey material in one pass at 90-150 tph. The 0-5 mm sand fraction is recovered without loss to water. … The GNR YM1240 is a COMPACT mobile sand washing-and-screening plant rated at 60-100 tph. A sand hopper, washing screen and screw scrub river and mountain sand with water, stripping clay and silt. … The GNR YM1650 is the range's BEST-SELLING washing-and-screening plant at 120-180 tph. Its wide washing screen and screw turn out clean sand in several sizes.

aggregate plant capacity tphcrushing plant capacity tph

Product

General 640 — Mobile Crushing & Screening Plant (Jaw + Impact)

The General 640 is a tow-behind, closed-circuit wheeled crushing and screening plant that pairs a GPJ 60 jaw with a GNR 50 impactor at 40-70 tph.

Product

Fine Material Screen

The fine material screen is a linear vibrating screen with two counter-rotating vibromotors for separation down to 600 microns; 5-10 tph, 5 decks. IME-GM155 model.

Product

GNR-MC110 — Twin-Chassis Mobile Jaw Crushing & Screening Plant

The GNR-MC110 is a twin-chassis wheeled plant pairing a GPJ 110 primary jaw with a DMK03 secondary impact crusher. 200-300 tph, 900 mm feed, 2000×6000 mm four-deck screen.

Product

Vibrating Rock Feeder (Grizzly Feeder)

General Makina vibrating rock feeder: 75-600 tph capacity, feed size up to 1500 mm, with a grizzly by-pass that pre-scalps fines and soil before the crusher.

Product

General 950 — Mobile Jaw + Impact Crushing & Screening Plant

The General 950 is a wheeled plant that sets a GPJ 90 primary jaw ahead of a DMK01 secondary impact crusher. 120-180 tph, 800 mm feed, 1600×5000 mm triple-deck horizontal screen.

Product

General 02 — Mobile Impact Crushing & Screening Plant

The General 02 is a wheeled crushing-and-screening plant driven by a GPS 1413 primary impactor.

Product

GNRK Series Jaw Crusher (Primary)

Capacity 20–600 tph, feed openings 610×380–1400×1100 mm, 30–200 kW. Suited to hard, abrasive rock such as granite, basalt, river gravel and slag; the entry crusher of every crushing-screening plant.

Product

Belt Conveyor — Conveyor Belt and Material Handling Systems

A modular bolted frame that continuously moves material between stages in a crushing-screening-washing plant.

Product

General 03 — Mobile Impact Crushing & Screening Plant (Flagship)

At 250-350 tph, with a 2400×5000 mm four-deck screen, a 750 kVA power unit and a 4-axle international-transport chassis, it carries near-stationary output in a form you can still move.

Product

Mobile Mechanical Plant — Stabilized Road Base (Plant-Mix)

With 200-600 tph capacity, 3-5 cold silos, a twin-shaft mixer (2×22 kW) and mass (bulk) cement dosing, it performs mechanical stabilization.

Product

GM 125 — Tracked Mobile Impact Crusher

It takes feed up to 700 mm, works at 150-250 tph and drives itself, needing no ground works. A 6 m³ hopper and 1360×2160 grizzly pre-screen come as standard.

Product

GNR-MVSI 900 — Mobile Vertical Shaft Impactor (VSI) Sand & Shaping Crusher

The GNR-MVSI 900 is a wheeled mobile sand and shaping plant with a VSI (vertical shaft impactor) tertiary crusher.