fine material screen capacity tph — Page 2

The conventional vibrating screen separates crushed aggregate into required sizes; a 1-4 deck circular-motion screen, 100-400 tph, GNR 1020 to GNR 2470 model range, bolted-weldless body and easily replaceable … The GNR ME1650 is a mobile DRY screening plant rated at 120-180 tph, carrying no washing unit. … The Mobil 90 combines a jaw crusher, a washing screen and a twin fine-material screw washer on a single wheeled chassis. … The GNR YM1240 is a COMPACT mobile sand washing-and-screening plant rated at 60-100 tph. A sand hopper, washing screen and screw scrub river and mountain sand with water, stripping clay and silt. … The GNR YM1650 is the range's BEST-SELLING washing-and-screening plant at 120-180 tph. Its wide washing screen and screw turn out clean sand in several sizes. … The fine material screen is a linear vibrating screen with two counter-rotating vibromotors for separation down to 600 microns; 5-10 tph, 5 decks. IME-GM155 model. … The trommel screen is a perforated cylindrical rotating drum; it screens clayey, wet and sticky material and recycling without blinding. Capacity 100-500 tph, 2-3 hole sizes. … The fine material screw washer scrubs soil, dust and clay-silt off sand with rotating spirals at 0-50 mm feed and 50-250 tph.

Product

Vibration-Controlled (Adjustable Stroke) Screen

The vibration-controlled screen uses a triple-shaft drive to produce an adjustable oval stroke; 100-400 tph. GNRTK-1550 and GNRTK-2060 models, triple-deck, bolted weld-free body.

Product

Grizzly (Scalping) Screen — G and M Types

The grizzly screen comes in two types: G-type for bypass ahead of the primary crusher (2 vibromotors, linear), M-type for fines removal ahead of the secondary crusher (eccentric shaft, circular).

Product

Wobbler Feeder — Stepped Elliptical Shaft Feeder

The wobbler feeder uses synchronized rotating elliptical disc shafts to feed wet, clayey and sticky run-of-mine material to the crusher without blinding, while separating fine mud and soil.

Product

GNR Series Tertiary Crusher

Capacity 70–300 tph, rotor 1200×650–1200×1500 mm, feed 150 mm, 132–250 kW. High shape quality on limestone and low-to-medium abrasive lines.

Product

GNR Series Vertical Shaft Impactor (VSI)

Capacity 45–210 tph, rotor 700–900 mm, feed ≤55 mm, 90–400 kW. Its purpose is exceptional cubicity and manufactured sand rather than reduction.