crushing plant capacity tph — Page 2

The assembly works of the fixed stone crushing and screening plant with a capacity of 450 - 500 TPH, one of our most successful projects we have realized in 2021, have been completed. … The General 02 is a wheeled crushing-and-screening plant driven by a GPS 1413 primary impactor. … Why the crushing plant capacity utilization rate decides your month The hourly rating printed on a datasheet describes what a machine can deliver with correct feed, correct material and no interruption … Its GPJ 90 jaw accepts feed up to 800 mm and the plant crushes, washes and screens riverbed and clayey material in one pass at 90-150 tph. The 0-5 mm sand fraction is recovered without loss to water. … With 200-600 tph capacity, 3-5 cold silos, a twin-shaft mixer (2×22 kW) and mass (bulk) cement dosing, it performs mechanical stabilization. … With 200-750 tph capacity, 3-5 cold aggregate silos, mass cement dosing and a 2×37 kW twin-shaft mixer, it produces stabilized granular road base (plant-mix) — not ready-mix concrete — for the base and … The GNR ME1650 is a mobile DRY screening plant rated at 120-180 tph, carrying no washing unit. … The GNR YM1240 is a COMPACT mobile sand washing-and-screening plant rated at 60-100 tph. A sand hopper, washing screen and screw scrub river and mountain sand with water, stripping clay and silt.

mobile crushing plant capacity tphstationary crushing plant capacity tphaggregate plant capacity tphscreening plant capacity tphcrushing plant capacity

Product

GNR-MC110 — Twin-Chassis Mobile Jaw Crushing & Screening Plant

The GNR-MC110 is a twin-chassis wheeled plant pairing a GPJ 110 primary jaw with a DMK03 secondary impact crusher. 200-300 tph, 900 mm feed, 2000×6000 mm four-deck screen.

Product

General 640 — Mobile Crushing & Screening Plant (Jaw + Impact)

The General 640 is a tow-behind, closed-circuit wheeled crushing and screening plant that pairs a GPJ 60 jaw with a GNR 50 impactor at 40-70 tph.

Product

Belt Conveyor — Conveyor Belt and Material Handling Systems

A modular bolted frame that continuously moves material between stages in a crushing-screening-washing plant.

Product

General 950 — Mobile Jaw + Impact Crushing & Screening Plant

The General 950 is a wheeled plant that sets a GPJ 90 primary jaw ahead of a DMK01 secondary impact crusher. 120-180 tph, 800 mm feed, 1600×5000 mm triple-deck horizontal screen.

Product

GNR-MVSI 900 — Mobile Vertical Shaft Impactor (VSI) Sand & Shaping Crusher

The GNR-MVSI 900 is a wheeled mobile sand and shaping plant with a VSI (vertical shaft impactor) tertiary crusher.

Product

GNRK Series Jaw Crusher (Primary)

Capacity 20–600 tph, feed openings 610×380–1400×1100 mm, 30–200 kW. Suited to hard, abrasive rock such as granite, basalt, river gravel and slag; the entry crusher of every crushing-screening plant.

Product

Top-Driven Multi-Slope Screen (Banana Screen)

The top-driven multi-slope screen (banana screen) has 3 different-slope stages that give +30% capacity over a flat screen of the same size; 100-400 tph, ELKK-2565 and ELKK-2580 models, 3 decks.

Product

GNR ME2060 — Fully Automatic Mobile Screening Plant

GNR ME2060 mobile screening plant: 200-350 tph capacity, 2000×6000 mm triple-deck screen, 20 m³ hopper with grizzly pre-scalping. Dry screening, full automation.

Product

GPS Series Primary-Secondary Impact Crusher

The GPS series is a General Makina HSI crusher combining primary and secondary impact crushing in one body. Capacity 100–400 tph, rotor 1200×1000–1400×1500 mm, feed 600–1000 mm, 160–315 kW.

Product

GNRCK Series Hammer Crusher

Send us your capacity and material; we provide a project-specific quote and full-plant solution.

Product

GNR PDK Series Primary Impact Crusher

Capacity 250–900 tph, rotor 1400×1500–1600×2000 mm, feed 900–1300 mm, 200–500 kW. On limestone it delivers up to 20:1 reduction and highly cubical product in one stage.

Product

GNR DMK Series Secondary Impact Crusher

Capacity 120–500 tph, rotor 1100×1000–1400×2000 mm, feed 800 mm, 160–500 kW. On limestone and low-to-medium abrasive lines it gives ~10:1 reduction and high shape quality.