Skip to content
+90 543 382 35 35 [email protected]
24/7 WHATSAPP LINE

concrete batching plant capacity tph — Page 2

The General Makina Mobile Mechanical Plant produces stabilized granular road base (plant-mix) for highways — it is NOT ready-mix concrete. … With 200-750 tph capacity, 3-5 cold aggregate silos, mass cement dosing and a 2×37 kW twin-shaft mixer, it produces stabilized granular road base (plant-mix) — not ready-mix concrete — for the base and … The GNR ME1650 is a mobile DRY screening plant rated at 120-180 tph, carrying no washing unit. … The GNR-MC110 is a twin-chassis wheeled plant pairing a GPJ 110 primary jaw with a DMK03 secondary impact crusher. 200-300 tph, 900 mm feed, 2000×6000 mm four-deck screen. … The GNR YM1650 is the range's BEST-SELLING washing-and-screening plant at 120-180 tph. Its wide washing screen and screw turn out clean sand in several sizes. … General Makina vibrating rock feeder: 75-600 tph capacity, feed size up to 1500 mm, with a grizzly by-pass that pre-scalps fines and soil before the crusher. … Its GPJ 90 jaw accepts feed up to 800 mm and the plant crushes, washes and screens riverbed and clayey material in one pass at 90-150 tph. The 0-5 mm sand fraction is recovered without loss to water. … The General 640 is a tow-behind, closed-circuit wheeled crushing and screening plant that pairs a GPJ 60 jaw with a GNR 50 impactor at 40-70 tph.

mobile concrete batching plant capacity tphstationary concrete batching plant capacity tph

GNR ME2060 — Fully Automatic Mobile Screening Plant Product

GNR ME2060 — Fully Automatic Mobile Screening Plant

GNR ME2060 mobile screening plant: 200-350 tph capacity, 2000×6000 mm triple-deck screen, 20 m³ hopper with grizzly pre-scalping. Dry screening, full automation.
Vibrating Sand Feeder — Bin/Hopper Feeder Product

Vibrating Sand Feeder — Bin/Hopper Feeder

It accepts up to 200 mm feed and ensures uninterrupted flow at wash-and-screen outlets and concrete-plant aggregate lines.
Top-Driven Multi-Slope Screen (Banana Screen) Product

Top-Driven Multi-Slope Screen (Banana Screen)

The top-driven multi-slope screen (banana screen) has 3 different-slope stages that give +30% capacity over a flat screen of the same size; 100-400 tph, ELKK-2565 and ELKK-2580 models, 3 decks.
GNR K Series Cubicizer Crusher Product

GNR K Series Cubicizer Crusher

Capacity 45–250 tph, rotor 1000×750–1550×1800 mm, feed 120–210 mm, 45–160 kW. It improves grain shape for concrete/asphalt and raises manufactured-sand quality.
GNR PDK Series Primary Impact Crusher Product

GNR PDK Series Primary Impact Crusher

The GNR PDK series primary impact crusher (HSI) breaks coarse limestone and concrete waste by impact. Capacity 250–900 tph, rotor 1400×1500–1600×2000 mm, feed 900–1300 mm, 200–500 kW.
GPS Series Primary-Secondary Impact Crusher Product

GPS Series Primary-Secondary Impact Crusher

Capacity 100–400 tph, rotor 1200×1000–1400×1500 mm, feed 600–1000 mm, 160–315 kW. On limestone it delivers coarse crushing plus cubical secondary product from a single machine, cutting CAPEX.
GNR DMK Series Secondary Impact Crusher Product

GNR DMK Series Secondary Impact Crusher

Capacity 120–500 tph, rotor 1100×1000–1400×2000 mm, feed 800 mm, 160–500 kW. On limestone and low-to-medium abrasive lines it gives ~10:1 reduction and high shape quality.
GNRK Series Jaw Crusher (Primary) Product

GNRK Series Jaw Crusher (Primary)

Capacity 20–600 tph, feed openings 610×380–1400×1100 mm, 30–200 kW. Suited to hard, abrasive rock such as granite, basalt, river gravel and slag; the entry crusher of every crushing-screening plant.