Skip to content
+90 543 382 35 35 [email protected]
24/7 WHATSAPP LINE

aggregate plant capacity tph — Page 2

With 200-600 tph capacity, 3-5 cold silos, a twin-shaft mixer (2×22 kW) and mass (bulk) cement dosing, it performs mechanical stabilization. … With 200-750 tph capacity, 3-5 cold aggregate silos, mass cement dosing and a 2×37 kW twin-shaft mixer, it produces stabilized granular road base (plant-mix) — not ready-mix concrete — for the base and … The GNR ME1650 is a mobile DRY screening plant rated at 120-180 tph, carrying no washing unit. … The GNR YM1650 is the range's BEST-SELLING washing-and-screening plant at 120-180 tph. Its wide washing screen and screw turn out clean sand in several sizes. … Its GPJ 90 jaw accepts feed up to 800 mm and the plant crushes, washes and screens riverbed and clayey material in one pass at 90-150 tph. The 0-5 mm sand fraction is recovered without loss to water. … The GNR YM1240 is a COMPACT mobile sand washing-and-screening plant rated at 60-100 tph. A sand hopper, washing screen and screw scrub river and mountain sand with water, stripping clay and silt. … The twin vibrating screen runs two screen bodies together to double the surface area; 100-500 tph capacity, circular motion, screening without choking in high-tonnage stationary crushing plants.

aggregate bin capacity tphcrushing plant capacity tphscreening plant capacity tph

Top-Driven Multi-Slope Screen (Banana Screen) Product

Top-Driven Multi-Slope Screen (Banana Screen)

The top-driven multi-slope screen (banana screen) has 3 different-slope stages that give +30% capacity over a flat screen of the same size; 100-400 tph, ELKK-2565 and ELKK-2580 models, 3 decks.
Vibrating Sand Feeder — Bin/Hopper Feeder Product

Vibrating Sand Feeder — Bin/Hopper Feeder

It accepts up to 200 mm feed and ensures uninterrupted flow at wash-and-screen outlets and concrete-plant aggregate lines.
GNR ME2060 — Fully Automatic Mobile Screening Plant Product

GNR ME2060 — Fully Automatic Mobile Screening Plant

GNR ME2060 mobile screening plant: 200-350 tph capacity, 2000×6000 mm triple-deck screen, 20 m³ hopper with grizzly pre-scalping. Dry screening, full automation.
GNR DMK Series Secondary Impact Crusher Product

GNR DMK Series Secondary Impact Crusher

The GNR DMK series secondary impact crusher turns primary product into cubical, well-graded secondary aggregate. Capacity 120–500 tph, rotor 1100×1000–1400×2000 mm, feed 800 mm, 160–500 kW.
GNR Series Vertical Shaft Impactor (VSI) Product

GNR Series Vertical Shaft Impactor (VSI)

Capacity 45–210 tph, rotor 700–900 mm, feed ≤55 mm, 90–400 kW. Its purpose is exceptional cubicity and manufactured sand rather than reduction.
GNR K Series Cubicizer Crusher Product

GNR K Series Cubicizer Crusher

Capacity 45–250 tph, rotor 1000×750–1550×1800 mm, feed 120–210 mm, 45–160 kW. It improves grain shape for concrete/asphalt and raises manufactured-sand quality.
GNR Series Tertiary Crusher Product

GNR Series Tertiary Crusher

Capacity 70–300 tph, rotor 1200×650–1200×1500 mm, feed 150 mm, 132–250 kW. High shape quality on limestone and low-to-medium abrasive lines.
GPS Series Primary-Secondary Impact Crusher Product

GPS Series Primary-Secondary Impact Crusher

Capacity 100–400 tph, rotor 1200×1000–1400×1500 mm, feed 600–1000 mm, 160–315 kW. On limestone it delivers coarse crushing plus cubical secondary product from a single machine, cutting CAPEX.