aggregate bin capacity tph — Page 2

The General Makina aggregate bin is a compartmented steel hopper that stores sand, gravel and crushed-stone fractions in separate cells and feeds a concrete batching plant. 2-8 bins, 10-50 m³ per bin, … A vibrating sand feeder is a vibrating bin that stockpiles processed sand, chippings and aggregate off the ground in a 25-100 m³ hopper and feeds it to a conveyor, screen or truck at a steady, dosed rate … A twinshaft mixer, a 4x30 m³ aggregate bin and fully automatic computerized control supply ready-mix concrete to large-scale infrastructure and building projects. … With 200-600 tph capacity, 3-5 cold silos, a twin-shaft mixer (2×22 kW) and mass (bulk) cement dosing, it performs mechanical stabilization. … With 200-750 tph capacity, 3-5 cold aggregate silos, mass cement dosing and a 2×37 kW twin-shaft mixer, it produces stabilized granular road base (plant-mix) — not ready-mix concrete — for the base and … The twin vibrating screen runs two screen bodies together to double the surface area; 100-500 tph capacity, circular motion, screening without choking in high-tonnage stationary crushing plants.

aggregate plant capacity tph

Product

General 800 — Mobile Crushing & Screening Plant (Primary Impact)

Feeding 600 mm rock at 80-120 tph, it gives a high reduction ratio and cubical aggregate, a natural fit for limestone and low-abrasive stone.

Product

Trommel Screen (Rotary Drum Screen)

Capacity 100-500 tph, 2-3 hole sizes. Numeric drum diameter/length is set per project; runs wet with optional water spray.

Product

Belt Conveyor — Conveyor Belt and Material Handling Systems

General Makina belt conveyors: 7 widths from 500 to 1200 mm, built to any required length, 50-1000 tph capacity. Geared-motor or belt-and-pulley drive; flat, chevron and cleated belt options.

Product

Mobile Concrete Batching Plant — 30-150 m³/h Ready-Mix Plant

With pan or twin-shaft mixers, a four-compartment aggregate bin, separate load-cell scales and full-auto PLC control, four models run from M-Diamond 60 to M-Royal 150.

Product

Top-Driven Multi-Slope Screen (Banana Screen)

The top-driven multi-slope screen (banana screen) has 3 different-slope stages that give +30% capacity over a flat screen of the same size; 100-400 tph, ELKK-2565 and ELKK-2580 models, 3 decks.

Product

Stationary Concrete Batching Plant — Diamond 60, Titan 100, Magnum 120, Royal 150

The stationary plant sits on a permanent foundation with larger stock bins and longer feed conveyors.

Product

GNR ME2060 — Fully Automatic Mobile Screening Plant

GNR ME2060 mobile screening plant: 200-350 tph capacity, 2000×6000 mm triple-deck screen, 20 m³ hopper with grizzly pre-scalping. Dry screening, full automation.

Product

GNR K Series Cubicizer Crusher

Capacity 45–250 tph, rotor 1000×750–1550×1800 mm, feed 120–210 mm, 45–160 kW. It improves grain shape for concrete/asphalt and raises manufactured-sand quality.

Product

GNR PDK Series Primary Impact Crusher

Capacity 250–900 tph, rotor 1400×1500–1600×2000 mm, feed 900–1300 mm, 200–500 kW. On limestone it delivers up to 20:1 reduction and highly cubical product in one stage.

Product

GNR Series Vertical Shaft Impactor (VSI)

Capacity 45–210 tph, rotor 700–900 mm, feed ≤55 mm, 90–400 kW. Its purpose is exceptional cubicity and manufactured sand rather than reduction.

Product

GNRK Series Jaw Crusher (Primary)

Capacity 20–600 tph, feed openings 610×380–1400×1100 mm, 30–200 kW. Suited to hard, abrasive rock such as granite, basalt, river gravel and slag; the entry crusher of every crushing-screening plant.

Product

GPS Series Primary-Secondary Impact Crusher

Capacity 100–400 tph, rotor 1200×1000–1400×1500 mm, feed 600–1000 mm, 160–315 kW. On limestone it delivers coarse crushing plus cubical secondary product from a single machine, cutting CAPEX.